An ideal tool for connecting a 100BASE-T1/1000BASE-T1 ECU or network.

This realizes a connection between the 1000BASE-T1/100BASE-T1 network and an USB 3.1 port. Featuring TE MATEnet and USB 3.1 Type-C connectors. This device acts as a standard network interface card when plugged into a PC.

100/1000BASE-T1 USB Interface: An ideal tool for connecting a 100BASE-T1/1000BASE-T1 ECU or network, to a computer or laptop without an internal network card. Examples such as Ultrabooks, mini-PCs etc.

Communication speed and master/slave settings can be auto negotiated with a link partner.  Can also be set manually by the user. Device status and port diagnostic can be accessed via a Virtual COM port. Can be used as a USB-CAN(/FD) interface.

HIGHLIGHTS:

• Automotive Ethernet to USB 3.1 network interface card
• 1000BASE-T1 and 100BASE-T1 support
• 100/1000 Mbit full-duplex communication
• Speed auto-negotiation or manual selection
• Master/slave auto-negotiation or manual selection
• IEEE and Legacy mode
• Automatic polarity detection on T1 port
• Frame generator mode
• USB virtual COM port for configuration, status and port diagnostic
• Free-of-charge PC application
• Can be used as a USB to CAN(/FD) interface
• USB Type-C connector
• USB-powered
• Aluminum enclosure
• DIN rail mounting possibility

Built-In status LEDs with dip switches allow you to visualize the port status and configure its parameters. The interface offers features such as frame generator and cable diagnostic.

Plugging into a computer’s USB 3.x port, the device is enumerated as a network interface card (supporting both 1000 Mbit and 100 Mbit speeds depending on the T1 port speed) and a virtual COM port that can be used to programmatically access the device’s status. Additionally, the configuration as we use the USB to CAN(/FD) interface function (works simultaneously with the 100/1000BASE-T1 network interface card function).

The open communication protocol over USB allows readily status information and configure the port parameters, thus enabling an easy way to integrate the device into any system. The user can programmatically configure the device, and a free-of-charge PC application is available. This will allow you to visualize the device’s status, configure its parameters and use advanced functions.

SPECIFICATIONS:

Free of Charge PC Application

The 100/1000BASE-T1 USB Interface PC application is provided free-of-charge.

Features:

• Read port status: link, speed, master/slave, signal quality, insertion and return loss
• Override device’s configuration: auto-negotiation, speed, IEEE/Legacy mode
• Run cable test
• Use the device as a USB-CAN(/FD) interface: configure CAN channel, transmit/receive CAN and CAN FD frames

The application is available for Microsoft Windows and uses the .NET framework.

Communication Protocol for Integration

The open communication protocol is available to access the media converter over USB or CAN(/FD). The protocol allows to remotely read status and configure the T1 port, or to use the device as a USB-CAN(FD) interface.

ADDITIONAL "SPECIAL ORDER" ACCESSORIES:

Ordering Information: