The ELK-M1XEP is an Ethernet Appliance to be used to connect a control in the M1 Family to an Ethernet network with an RS-232 Serial Port Interface. It features security-sensitive environments, email event notifications, and FIPS-compliant encryption algorithms.

Powered by an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. A built-in configuration connection software is set up in ElkRP network password, and so on. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be set up with a static IP address.

Product Features:

• Secure connection with password protection and SSL/TLS encryption
• Flash Memory for Firmware Updating
• Event notification via E-Mail (SMTP)
• Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
• Supports Network Time Protocol for synchronizing the M1/EZ8’s clock with an Internet time server.
• Internet Monitoring and Reporting Capability
• Network stack supporting the following protocols:-TCP, UDP, DHCP, SSL/TLS, NTP, SMTP
• Federal Information Processing Standards (FIPS) 128-bit encryption
• Integrated 802.3 compliant 10/100 Mbit network interface
• RS232, DB9M 9-pin serial port connection
• Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
• RJ45 8-pin Network Jack
• 2.1mm barrel type power connector (center positive)
• LED Indicators for Power, Link, and Data

Product Specifications:

• Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply **
• Current Draw: approx. 300 mA
• Housing Dimensions: 4.25″ x 6.375″ x 2.125″
• Circuit Board Dimensions: 2.25″ x 3.95″
• ELK-W040A Serial Ribbon Cable included

Included in the Box:

• M1 Ethernet Interface
• Plastic Housing
• 4 #6 Plastic Anchors
• 4 #6 Pan Head Sheet Metal Screws
• ELK-P1216 1.6A, 12Vdc Power Supply
• ELK-W040A DB9 Pin Serial Cable Assembly
• Instructions