Quick Fix is a 2 component urethane, concrete repair product. Its low viscosity allows for deep substrate penetration resulting in permanent repair of sound and still concrete.

RECOMMENDED FOR: Industrial repairing of spalled concrete, pop-outs, holes, and cracks NOT RECOMMENDED FOR: Expansion Joints.

PRIMER: The material is self-priming.

PRODUCT MIXING: The product has a 1:1 liquid mix ratio by volume. Mix only an amount of material that can be used in 1-3 minutes. Mix the liquids (½ pint part A and ½ pint part B) for 15 seconds and immediately add in the ½ gallon blended aggregate and remix.

PRODUCT APPLICATION: Immediately after the three components are mixed, (Product has a very short pot life), place the material into the area to be repaired with a trowel or other suitable equipment. Finally, trowel the floor to smooth out the area and remove any excess material. Allow the material to cure for ten to twenty minutes before foot traffic. For heavy equipment such as fork trucks, allow the material to cure for a half hour to an hour before using area that has been patched.