EMF Ball Joints provide some of the best value among ball joint options for the 2003-2012 3rd gen Ram 2500/3500 HD truck platform. Made in Canada by a family owned company, these ball joints feature premium components and coatings for a durable lifespan, even with larger tires. They are also adjustable to compensate for wear and can be easily serviced on the truck. If you want the ultimate ball joints for your Ram truck, these may be the ones for you! 

Do you need oversize or regular joints?

Oversize housing ball joints are used on trucks where the ball joint bore in the axle C has been enlarged by repeated ball joint replacements, or replacements with other oversize housing joints like Moog or similar. Standard joints are used on trucks with fresh axle C’s or on trucks that haven’t had many ball joint replacements. 

Once you stretch the bore of the C, you cannot go back, so we like to use oversize joints as a last resort. For 99% of trucks, we like to use standard joints, and then this install technique. 

Fitment:

These ball joints fit all four wheel drive 2003-2013 Ram 3500 and 2500 trucks. If this is your first set of ball joint to replace the factory units, go with the standard size. If your truck has gone through many sets of oversize parts store joints, go with the oversize joints to ensure a snug fit. 

Detailed Information:

EMF's approach to building their version of the best ball joint on the market has servicing at the forefront of the design. These joints are easily greased, and they are also adjustable. If the ball joint wears in and develops movement, simply tighten the joint until it's back within specs. Once you run out of adjustment, you can rebuild the joints without needing to press them out of the knuckle. It's a clever design, and offers quality WELL above what the price. EMF Ram ball joints are made from a 4140 HTSR material and then gas nitride coated to increase hardness.

What's included:

1 Pair of Upper Ball Joints

1 Pair of Lower Ball Joints

1 Pair of Intermediate Steering Shaft Bushings

Install Nuts

Install Washer and Cup (To avoid damaging the cap and the ring when pressing the ball joint into the knuckle)

Instructions and an EMF Sticker

DUE TO SUPPLIER ISSUES, EMF WILL NO LONGER BE SUPPLYING THE ADJUSTABLE SPANNER WRENCHES WITH THESE KITS. THEY ARE NOT NEEDED FOR INSTALL. IF YOU WOULD LIKE AN ADJUSTABLE SPANNER WRENCH, THE PART NUMBER IS W30781 BY PERFORMANCE TOOL

Warranty:

Life-Time Warranty against Material and Manufacturers Defects. EMF will replace part of or the entire unit if it is determined to be an issue that falls under this category. The customer is encouraged to contact EMF directly to determine cause of fault and to receive warrantied products.

Warranty does not cover breakage due to misuse of the product, improper installation or as a result of another component failure on the vehicle.

EMF Ball Joints are meant to be rebuilt, which means the internal races and pin will wear over time under normal circumstances. The internal race and pin components are not covered by replacement Warranty, unless it is determined there is a manufacturer defect that caused premature wear.  order to maximize your product life, regular maintenance which includes greasing at every oil change and tightening of the cap or ring as needed.